載入中...請稍候...

2 Poles Dip switches Red

  • 圖片 1
價格:
paul@advancepanda.com
品牌:
條件:
存貨量:
1000
Bookmark and Share


產品介紹

SPECIFICATION

 

 

 

ELECTRICAL

 

Electrical life: 2000 operation cycles per switch 24VDC, 25mA.
Non-Switching Rating: 100mA, 50 VDC
Switching Rating: 25mA, 24VCD.

 

Contact resistance:  (a) 50mΩ max. at initial 
(b) 100mΩ max. after life test.

 

Insulation resistance: 100MΩ min. (at 500VDC)
Dielectric Strength: 500VAC/1 minute.
Capacitance: 5pF max.
Circuit: Single pole single throw.

 

 

 

MECHANICAL

 

Mechanical life: 2000 operations per cycle switch 
Operation Force: 800gf max.
Stroke: 2.0mm
Operation Temp: -25° C to +70° C
Storage Temp: -40° C to +85° C

 

Vibration Test:  MIL-STD-202F METHOD 201A 
Frequency: 10-55-10Hz/1 min
Directions: X, Y, Z, three mutually
perpendicular directions.
Time: 2 hours each direction.
High reliability.

 

Shock Test:  MIL-STD-202F METHOD 213B.
CONDITION A
GRAVITY: 50G (peak value), 11 m/sec.
Direction and times: 6 sides and three times in
each direction. High reliability.

 

 

 

SOLDERING AND CLEANING PROCESSES

 

For best results, please follow these recommendations: Keep all switch contacts in their "OFF" position for all operations.

 

WAVE SOLDERING: Recommended solder temperature at 500 F (260° C) max. 5 seconds.

 

 

HAND SOLDERING Use a soldering iron of 30 watts, controlled at 608 F(320° C) approximately 2 seconds while applying solder.

 

 

CLEANING PROCESS Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used, do not subject the switch to solvents at temperatures above 125 F (51° C).